Adjustable Irrigation Drippers for Flower Beds, Vegetable and Herb Gardens - 50PCS

Strategically place the emitter stakes so that the plant's root ball will be kept damp but not soaked. Adjust the flow for each plant and again every season according to the plant size. Remember to reaccess requirements as they grow and needs change!

Use a timer to water twice a day for only 5 or 10 minutes, depending on the plant's needs and weather. Ensure the moisture is getting where you want it. Don't assume rain means you can turn off the irrigation system, as leaves can redirect rainwater so it doesn't actually reach the roots!

To make the tubing much easier to work with, simply soak it in warm to hot water or lay it out in the sun for a little while to soften. When punching a hole, hold the hole punch at a right angle to the tubing to get a perfect seal around the barb of the emitter.

Always flush the system a bit before installing emitters to clear any debris. Create your lateral lines (1/4-in. tubing and emitters) before hooking them up to the main line. Always cut the tubing longer than needed, as it's much easier to trim off excess than to try to come up with additional lengths of tubing if miscut too short.

Your emitters farthest from the faucet will need to be set on a freely flowing adjustment due to loss of water pressure.

Why do you need an automatic drip irrigation system for your container or raised garden? Containers dry out so quickly that they often require once or even twice daily watering in hot weather. These emitters worked perfectly for our irrigation systems in our veggie garden as well as for the perimeter hedge, saving us the hassle of lugging around hoses to water them each day. It's a real time-saver that we should have done long ago.

The Irrigation Drippers have a total length of 5.2 inches and a water outlet hole diameter of 0.05 inch. They have a 360-degree irrigation angle and are suitable for 4/7mm (Inner/Outer diameter) tubes. Each dripper has 8 outlet holes at the top.

These drip emitters are made of quality plastic in black color. The bottom is sharp and easy to insert into the soil. The water flow can be adjusted by rotating the water outlet hole cap, allowing you to control the amount of water according to the plant's actual needs, saving water resources and money.

To connect the drippers, you can either connect them directly to the PE pipe or to the 4/7 distribution tubing. Soften the tube hole with hot water before connecting the tube and dripper.

These drip emitters have a wide application, suitable for pots, tubs, ground cover, landscaped gardens, flower beds, vegetable gardens, herbs gardens, greenhouses, orchards, lawns, and self-planting.

product information: